Our copper electroforming kit allows you to form copper onto any surface using two different conductive paints, silver-coated copper and graphite and also by the use of graphite powder. This kit is ideal for various uses; for sculptors or artists, jewellers looking to make one off pieces or prototypes; mechanical designers looking to finish off 3D printed or cold cast parts with real metal. It is ideal for those wanting to take the first steps into the world of electroforming.
Copper Electroforming Kit
5L Kit Contents
- Chemicals: copper electrolyte chemicals 5L including brighteners, graphite conductive paint, silver coated copper conductive paint, graphite powder, acrylic sealer
- Electrical Connector: copper anodes, copper wire, blue and brown wire, crocodile clips, current controller
- Accessories: guide, 5L tank, anode bag materisl, gloves, goggles
Ultimate Kit Contents
- Chemicals: copper electrolyte chemicals 5L including brighteners, silver conductive paint, graphite conductive paint, silver coated copper conductive paint, graphite powder, acrylic sealer
- Electrical Connector: copper anodes, copper wire, blue and brown wire, crocodile clips, current controller
- Accessories: guide, 5L tank, tank heater, electrolyte circulation pump, anode bags, gloves, goggles
Power supply option
- Longwei precision power supply (DC 0-30V, 0-10A)
Note:
Current controller, blue and brown wires are not included if power supply option is added.
If using the current controller you will need a DC power source to power the process.
You will also need 4 litres of distilled or deionised water.